The key to the role of Led hard strip lights is lighting and decoration design. They are mostly used in hotel restaurant halls, hotel rooms, restaurant bars, restaurants and other venues. In addition, they are used in car decoration, performance stage decoration design, urban architectural decoration design, and advertising decoration. , Theaters and public facilities are also often used in the urban lighting. It can be seen that LED hard strip lights have fully mobilized the role that cannot be underestimated in today's society.

　　LED hard strip light installation key points are introduced in detail

　　Key point 1: Prepare essential materials in advance

The raw materials that must be used are LED hard strip lights, drive power, multi-strand copper core flexible wires and their glass glue. Before installation, it is necessary to convert the mains power into a safe DC voltage that is consistent with the working voltage of the drive power.

　　 Essentials 2: Do a good job of routine inspection

First of all, check and try the switching power supply and light bar regularly to ensure that they are not damaged during the logistics and transportation. Then, measure the output power of the switching power supply to determine how many meters of the light bar must be connected to a power supply, and then make it clear The best wiring implementation scheme makes the access wire the shortest and the wiring work is very simple.

　　Key point 3: Wiring method of DC power supply

The led hard light bar must be connected to the live wire through the main power switch, N to the neutral wire, +V to the red wire of the light bar, -V to the black wire or black red wire of the light bar, and +V and -V are connected reversely, which is not easy to cause the light bar Don't worry about destruction, everyone.

　　Key point 4: Wiring method of DC power supply

DC power supply has two wiring methods: series and parallel. It is important to note that if the series connection method is selected, the length of the proposed route should not exceed 3 meters. If it exceeds 3 meters, it must be from the terminal of the DC power supply. Re-wire, otherwise there will be a problem that the back of the light bar is not bright enough.

　　 Essentials 5: Selection of the electric power of the light bar

　　 All connecting wires require power. Therefore, the electric power of the light bar should not exceed 80% of the rated power of the DC power supply. The small lamp bar of the 72-bead cabinet is 17.2 watts per meter.

　　Key point 6: Pay attention to the installation environment

The led hard strip light has a normal heat dissipation function, but if it is in a dusty place, it is easy to cause dust to cover its radiator, which will affect the normal heat dissipation of the led hard strip light. In addition, there should be no water vapor at the specific installation location. , Oil fume and other substances, due to the small gap in the lamp body itself, this kind of substance is easy to enter, and it will seriously affect the normal operation of the light bar. If it cannot be prevented, it is recommended to take protective measures.

　　The key points of the installation of led hard strip lights are introduced. I hope everyone can keep these key points in mind, so that they can be used in actual installation work.